Add a personal touch to your health and safety measures with a personalised face mask! Complete with 2 x PM2.5 filters, these face masks can be printed with any image or wording of your choice and are sure to be a talking point. Each mask has a small pouch where the filter fits, and is made from 100% polyester with an inner cotton lining for comfort. The elastic ear loops are adjustable (see below for instructions) and help create a tight fit to your face. The mask is reusable and washable (please note: filters must be replaced – contact us if you would like more). Dimensions: Mask Size – 11.5cm x 17.5cm, Filter Size – 8.5cm x 12cm Please see our Creating Your Design page for information on creating your product. CARING FOR YOUR MASK: Washing & Filters – we recommend a gentle wash (by hand if possible) with a light detergent. The frequency you wash your mask depends on the environment you use it in, and how often you wear it; however, as a rule of thumb – the more you wash, the better. Make sure you remove the filter before washing, and only replace it once the mask is dry. The frequency you change the filter also depends on the environment and time worn; we would recommend talking to a medical authority for further advice. Adjusting the Mask – the masks come with 2 little ‘beads’ which can be attached to the mask straps in order to ensure a tight fit. To do this, poke the straps through the larger hole in the bead (a matchstick works great for this) and then pull the straps through until comfortable. Please note: these masks should not be used as an alternative to medical masks.
