BigTreeTech BTT SB2209 Enhanced Build Board with CanBus

Get rid of all those cables! Connect your Stealthburner Printhead with 1 single CanBus cable. Uses mini GH1.25 connectors on the baseboard, which can be a bit difficult to connect. Connectors are included in the package though! Disassembling your StealthBurner printhead is also easier, as there are no more cables between Front and housing. The fans and Leds are connected to a PCB board in the front cover and click into the PCB on the main module of your printhead. WORKS ONLY WITH CANBUS so you may also need a U2C Canbus adaptor! Contents: CB0001 : stealthburner front PCB x 1 connection for 2 standard fans Connection for additional PWM Fan connection for RGB LEDs CBB2209: Stealthburner Back PCB (with TCM2209 stepper driver for extruder motor) x 1 Connection for Printhead Tghermistor (even PT100) Connection for Printhead Heating module connection for Bed Probe connection for Voron Tao / Klicky connection for BL_Touch built-in ADXL345 for vibration measurements All fans are adjustable to 5V-12V and 24V with sweaters on the main board USB-C connection for reprogramming the module CanBus connection with 24V and Canbus Signal pins 1 CanBus cable of 3meter